How to Change the Winch Controller's Batteries

Article Objective:

In this article, you will learn how to change the batteries in a Warn winch controller.

Affected Units:

Any Vandoit with a Warn winch installed in the front bumper

Issue Explanation:

The winch controller can be used both directly plugged in and wirelessly. When attempting to use the controller wirelessly, the controller is providing no audible or visual feedback, indicating it is out of power.

Resolution:

Tools needed: 

1. Philips screw driver
   
2. 2 AAA batteries

1. Unscrew the three bolts in the controller while holding both sides together.

3. Once all three bolts are loose, pry the sides apart.

4. Locate the two AAA batteries and replace them with new batteries.

5. Put the controller back together by placing both sides together and screwing all three bolts tight.

If the controller is not working after performing these steps, please reach out to the Customer Support team by submitting a ticket through the Customer Support portal or emailing support@vandoit.com.

• Related Articles

• Warn Winch - Basic Guide to Winching Techniques

  For use with the Warn VR EVO 12-S winch.

• GoPower Solar Controller Manual

  GoPower GP-PWM-30-UL Manual

• How to Pair the Victron SmartSolar Controller to the VictronConnect App

  Article Objective: To connect the Victron SmartSolar Controller to the VictronConnect App for remote monitoring Affected Units: Any Vandoit with a Victron MPPT SmartSolar Controller Resolution: 1. Download the VictronConnect app on your smartphone. ...

• Understanding Your Van's Solar System

  Article Objective: In this article, you will get to know the components that make up the solar system in your van: what they do and what their potential limitations are. Affected Units: Vandoit vans with rooftop solar panels This video provides a ...

• Solar Controller Not Working

  Confirmed Issue: No power to the GoPower solar controller Affected Units: Vandoit vans containing the GoPower solar controller Summary: The solar controller has no power. There is no information displayed on the screen. The screen will not turn on. ...